Menu

Malibu Cut For Glass

$0.00
SKU
CNSS-MALI-CONFIG-CFG
Minimum Size: 8" x 8"
Maximum Size: 30" x 72"
Stiles and Rails are 2 1/2" standard
Min Size w/ Mullions: 13" x 13"
This style is 7/8" thick
This style does not come with a center rail standard
Shown in Cherry w/ Clear Finish
All hinge options on this page are 1/2" overlay

The popular Malibu door style featuring a 7/8" frame with mitered corners is sure to hold up to years of use in a kitchen or office. The beautiful frame detailing and raised panel ensures that the timeless style will last just as long.

All Fast Cabinet Door products are hand-crafted in California, and North Carolina, and are available in a variety of wood species, including Alder, Maple, White Oak, Red Oak. As such, each door will be consistently unique. In addition, the natural characteristics of wood lend themselves to color variation, and this is also true when finish is applied.

Please note that this item will arrive as unfinished wood and will need to have a finish applied before installation.

For ordering Lazy Susan corners:
Select 1 door without boring
Select 1 door with "Lazy Susan Boring + Hinge Assembly" under Boring and Hinge Options
See the Frequently Asked Questions page for more information For susan/corner cabinet doors, is recommended to square off the edges where the pair of doors will meet. If the doors have a standard beveled outer edge, they may produce a large gap. If you'd like us to square the edge of the doors where they meet, please contact us with instructions to use OE1 outside edge on one side of each door. This adjustment will cost an additional $30 per door.

Each hinge from the Boring and Hinge Options selection is a 1/2" overlay

More Information
SKUCNSS-MALI-CONFIG-CFG
Display PriceStarting at $24.54 per sq. ft.
Write Your Own Review
You're reviewing:Malibu Cut For Glass
Designed By Method Marketing
© 2023 Fastcabinetdoors.com. All Rights Reserved.