FAQ
Frequently Asked Questions
To place an order follow these simple steps:
- Select a door or drawer front style
- Select your wood species
- Enter your door or drawer front measurements
- Display Cart
- Complete order
We have Lazy Susan Boring + Hinge Assembly as an option for most doors. Select "Lazy Susan Boring + Hinge Assembly" for one door in this corner, and "No Boring" for the other door.
This will add the necessary boring to one door, and leave its mate unbored. You'll receive 4 hinge sets; 2 that will mount the door to the cabinet, and 2 that will mount that door to its mate.
East Coast Orders
- Drawer Box - 12 Business Days
- Unfinished Wood - 17 Business Days
- RTF(Thermofoil) - 8 Business Days
- Clear Coat - 18 Business Days
- Primed - 18 Business Days
- Painted - 19 Business Days Add 1-3 business days for delivery
- Drawer Box - 8 Business Days
- Unfinished Wood - 8 Business Days
- RTF(Thermofoil) - 19 Business Days
- Clear Coat - 18 Business Days Add 1-3 business days for delivery
- Single doors – the doors require a ½” overlay on all 4 sides so for a single door. If your opening is 20”w x 20”h, the door size would be 21” w x 21” h.
- Double doors – the doors require a ½” overlay along the perimeter of the opening, and a 1/8" reveal between your doors. If your opening is 20”w x 20”h, the door sizes would be (2) 10 7/16” w x 21” h.
- Measure from the inside edge of one side to the corner.
- Add 1/2" to your width. (1/2" is the industry standard and the overlay we recommend)
- Subtract the thickness of the door from width measurement. This will ensure each door has enough room to fold in on itself.
- Repeat these steps for the other door in this corner.
- For instructions on how to order a lazy susan, please view this process under Ordering and Lead Times. You can also use our Lazy Susan door measurement calculator to help.
Most of our doors are 3/4" thick, while some of our doors are 7/8" thick. 7/8" thick doors will be noted in that door styles description.
You have the option to select a Plank drawer front with an edge that will match your doors. If you need help specifying the edge of any door, please use our chat feature located on the right hand side of your browser or send an email to [email protected]. Below is an example of what a Plank drawer front looks like with a Shaker door.

A $75 Fee will be applied every door from 50" to 59 15/16" and $150 to all doors 60" and over. This is due to the special handling that is required for larger items.
Yes, this is determined on a per need basis and depends on the height of the doors. Typically center rails are placed on doors over 50", and 66" for Cut for Glass doors, but some styles will not require them. Please contact us for further details on individual door styles. If a tall door without a center rail is needed, please email [email protected] with your order number and request to remove center rails from your tall doors.
All stiles and rails are solid wood. Raised panel doors have a solid wood panel. Inset panel doors have a solid wood frame with solid plywood panel. Paint grade doors have a solid wood frame with an MDF panel.
No. The size you enter will be the size you receive.
The doors will arrive with either wood or rubber stops, but will not come with the glass. We recommend taking your door to a local glass specialist to have it fitted with a glass panel of your choice. Below is an example of wooden stops that may come with your door.
Cope n' Stick refers to the tongue and groove joints we use to assemble the doors. This is one of the oldest and strongest joints used in cabinetry and is still the strongest type of joint used for doors.
- Rigid Thermal Foil (RTF) is comprised of a durable vinyl laid over Medium Density Fiberboard(MDF).
- Wood doors are comprised of a solid wood frame, and either a solid or plywood panel.
- The "Natural" is a cost efficient option that may vary in color, grain pattern, and may contain more knots.
- The "Select" option will be consistent in grain pattern, color, and will contain little to no knots.
Unless you request a matching back, all Thermofoil doors will be built with a white back.
Paint Grade Hardwood is a great economical option for those who don't have a wood species preference and plan to paint. The wood used for the stiles and rails is any paint grade hardwood that we have available. This could be a combination of Maple, Alder, Birch or Beech.
Our doors are manufactured in California or in Monroe depending on your location. The order will be built in the plant that is nearest to the ship location. There are exceptions where items are plant specific.
All items that have finish applied will be built in Monroe, North Carolina.
Top Colors
All Other Colors
See a color that is not currently available on a door style? Give us a call at 1-240-541-5631 or send us an email at [email protected] and we'll get it added for you!
Salice Standard Compact Hinge
Salice Excentra Soft-Close Compact Hinge
Salice 120 Degree Hinge
Salice 105 Degree Soft-Close Hinge
Lazy Susan Boring + Hinge Assembly
Watch this video for a full explanation on how to adjust your doors with hinge adjustments.
If you're looking at the front of the door and you plan to install hinges on the right, you'd select 'Right' for hinge location.
If boring is selected, the door will receive two bore holes 3" from the top and bottom of the door to the center of the cup. If the door is 40" or taller, a 3rd boring will be added directly centered between the top and bottom bore holes.
The bore pattern we use will depend on your selection from the 'Boring and Hinge Options' section of the door page. If you already have hinges and need A, B, B2, or T bore pattern, that customization can be requested by sending an email to [email protected].
Boring Only
Salice Standard Compact Hinge & Salice Excentra Soft-Close Compact Hinge
Salice 120 Degree Hinge & Salice 105 Degree Soft-Close Hinge
Lazy Susan Boring + Hinge Assembly (U bore pattern on both sides)
T Bore Pattern (Non-Standard by request only)
B2 Bore Pattern (Non-Standard by request only)
We offer a variety of Sherwin Williams colors in Satin (Sheen 30).
We use a solvent-based finish.
You can calculate a shipping quote by entering your door and drawer front order and registering with your shipping address before committing to an order. This process will give you a complete quote.
Our website is open for browsing and purchasing 24 hours a day, 7 days a week, 365 days a year. Our call center is open from 7am-3:30pm PST, Monday through Friday.
The call center is closed on the following US Holidays:
- New Year's Day
- Memorial Day
- Independence Day
- Labor Day
- Thanksgiving and the Friday following Thanksgiving
- Christmas day
Viewing your order and order history is a great way to follow along during the ordering process. Log in to your account at the top of the page to view orders.
Log in to your account at the top of the page. You'll see a spot to edit all of the information on your page, such as billing/ shipping addresses or opting into our newsletter! Need help? Give us a call, we'd be happy to update it on our side as well.
FastCabinetDoors.com places a lot of emphasis in placing a correct order. "Measure twice. Cut once" Please be certain about your order prior to placing it. Orders enter production almost immediately. A minimum of 35% of a customers purchase order total will be charged as a proration fee to any cancellations. This fee covers material costs and administration fees.
No. Because every door and drawer front is custom built, we cannot accept returns. FastCabinetDoors.com does not keep stock.
If an item is labeled as a "Non Warranty" item, or an item is built outside standard specifications such as, but not limited to, sizes outside the listed minimum or maximum, removal of required center rails there will be NO GUARANTEE against damages during transit, warping or twisting.
We urge you to stay within the minimum and maximum size, as we cannot replace an item that has been delivered warped or damaged.
RTF (Thermofoil) - Limited 5 Year Warranty: During the 1st year of ownership if the item peels or chips under normal circumstances, Fast Cabinet Doors will pay 100% of replacement costs.
During the 2nd year, Fast Cabinet Doors will pay 80% of replacement costs.
During the 3rd year, Fast Cabinet Doors will pay for 60% of replacement costs.
During the 4th year, Fast Cabinet Doors will pay for 40% of replacement costs.
During the 5th year, Fast Cabinet Doors will pay for 20% of replacement costs.
This means, we'll rebuild your item for the set percentage according to the ownership year, and you will pay the difference (if any).
Wood - 1 Year Warranty: If an item warps, twists, splinters, and has been given reasonable treatment, and is within the minimum and maximum size, Fast Cabinet Doors will pay 100% of the replacement cost
For questions regarding what is or isn't covered in the warranty, please reach out to a support agent at [email protected]
Contact us at [email protected] for additional help.