Menu

Heritage Cabinet Door

$0.00
SKU
CNSS-HERI-CONFIG
Minimum Size: 7 1/2" x 7 1/2"
Maximum Size: 30" x 72"
Stiles and Rails are 2 1/4" Standard
All Doors 48" and over will have a center rail.
If custom stiles and rails are selected, please email [email protected] with specifications.
Shown in Alder w/ Clear Finish
All Salice hinges shown on door pages are for 1/2" overlay
Our warranty does not apply to doors with widths greater than 30" or heights over 72"

The beautiful raised panel design of the Heritage door style adds a touch of luxury to traditional cabinets.

All Fast Cabinet Door products are hand-crafted in California and North Carolina, and are available in a variety of wood species, including Alder, Maple, White Oak, Red Oak. As such, each door will be consistently unique. In addition, the natural characteristics of wood lend themselves to color variation, and this is also true when finish is applied.

Please note that this will arrive as unfinished wood and will need to have a finish applied before installation.

For ordering Lazy Susan corners:
Select 1 door without boring
Select 1 door with "Lazy Susan Boring + Hinge Assembly" under Boring and Hinge Options
See the Frequently Asked Questions page for more information For susan/corner cabinet doors, is recommended to square off the edges where the pair of doors will meet. If the doors have a standard beveled outer edge, they may produce a large gap. If you'd like us to square the edge of the doors where they meet, please contact us with instructions to use OE1 outside edge on one side of each door. This adjustment will cost an additional $30 per door.

Each hinge from the Boring and Hinge Options selection is a 1/2" overlay

More Information
SKUCNSS-HERI-CONFIG
Display PriceStarting at $18.45 per sq. ft.
Write Your Own Review
You're reviewing:Heritage Cabinet Door
Designed By Method Marketing
© 2023 Fastcabinetdoors.com. All Rights Reserved.