Skip to the beginning of the images gallery

Customizable Inset Panel Cabinet Door

Be the first to review this product

$0.00

SKU

CNSI-CSTM-DR

Wood Type

Width

Height

Boring and Hinge Options

Inside Edge

Outside Edge

Optional Non-Standard Stiles and Rails Widths

Qty

Create a door that is built just for you!
Standard stiles and rails are 2-1/4"
Min Width: 7 1/2"
Min Height: 7 1/2"
If Custom Stiles and Rails +20% are selected, email [email protected] with your specifications
Center Rail required at heights of 50" and above.

Details

With over 50,000 possible combinations you're almost guaranteed to select a unique style. Whether you're looking for a style that's created by you, or simply trying to match and replace a single broken door, a customizable door provides you with all the options you need.

For ordering Lazy Susan corners:
Select 1 door without boring
Select 1 door with "Lazy Susan Boring + Hinge Assembly" under Boring and Hinge Options
See the Frequently Asked Questions page for more information For susan/corner cabinet doors, is recommended to square off the edges where the pair of doors will meet. If the doors have a standard beveled outer edge, they may produce a large gap. If you'd like us to square the edge of the doors where they meet, please contact us with instructions to use OE1 outside edge on one side of each door. This adjustment will cost an additional $30 per door.

Each hinge from the Boring and Hinge Options selection is a 1/2" overlay

European Hinge Boring Specifications

All hinge boring options use a 35 mm hinge cup hole with the center of the cup located 3 inches from both the top and bottom of the cabinet door.

B Bore – For compact European press-in (doweled) hinges. Cup setback: 3 mm. Includes two 8 mm dowel holes.
A Bore – For standard European press-in (doweled) hinges. Cup setback: 5 mm. Includes two 8 mm dowel holes.
U Bore – For compact European screw-in hinges. Cup setback: 3 mm. Includes two 2 mm pilot holes for mounting screws.
T Bore – For standard European screw-in hinges. Cup setback: 5 mm. Includes two 2 mm pilot holes for mounting screws.

More Information

More Information
SKU	CNSI-CSTM-DR
Display Price	Starting at $26.68 per sq. ft

Reviews

Write Your Own Review